Universal USB to Serial Adapter
Xilinx Parallel Programmer based on the popular Cable III with red and green indicators.
Contents of Kit:
- One 2.0" x 1.5" PCB
- Two 74HCT125 Buffers
- Four 100pF Capacitors
- One 0.01uF Capacitor
- One 5.1K Resistor
- Two 300ohm Resistors
- Five 100ohm Resistors
- One 25 pin Male Dsub Connector
- One 10 pin Right Angle Header
- One 3mm Red LED
- One 3mm Green LED
Vcc is from 3.3V to 5V.
Through hole parts make for easy assembly. This kit should take no more than 30 minutes to complete and you are ready to start programming the Xilinx line of products including CPLD's and FPGA's.
Follow this link for ordering and more information
Or contact us
< Back to Products & Services
Welcome Page | About Us | Products & Services | In the News | Ask the Experts | Guest Book | Job Opportunities